Seachem MultiTest Marine Basic Test Kit

  • $ 30.99

This kit combines the Marine pH & Alkalinity, Ammonia, and Nitrite & Nitrate kits into one kit. MultiTest Marine Basic performs over 75 tests and contains reference samples for validation.
  • Combines the Marine pH & Alkalinity, Ammonia, and Nitrite & Nitrate kits.
  • Multi-cavity plate for simultaneous testing of up to 6 tests at the same time.
  • Includes reference for test validation.
Marine pH & Alkalinity:
The Marine pH & Alkalinity test features a unique dye that has a pronounced color change between 8.0 and 8.3, making it the easiest kit on the market to read in that critical range. It is suitable for marine or brackish water only. Alkalinity may be read from the same sample in 0.5 meq/L increments.

The ammonia test measures total (NH3 and NH4+) and free ammonia (NH3 only) down to less than 0.05 mg/L and is virtually interference free in marine and fresh water. Free ammonia is the toxic form of ammonia and thus it is much more important to keep an eye on the level of free ammonia in your system. This test may be used with freshwater or marine water.

The Nitrite/Nitrate test measures nitrite to less than 0.1 mg/L and nitrate to less than 0.2 mg/L in marine or freshwater. The values reported are expressed as nitrite and nitrate rather than nitrogen (to convert to nitrogen, simply divide by 3.3 and 4.4, respectively).

MultiTest Marine Basic performs over 75 tests each of marine pH and alkalinity, ammonia, and nitrite/nitrate, and with the multi-cavity test plate, multiple tests can be run at the same time.

  • pH: 7.80–8.70
  • Alkalinity: 0–∞
  • Ammonia: 0–6 mg/L
  • Nitrite: 0-25 mg/L
  • Nitrate: 0–50 mg/L
Detectable changes on the color chart in the following increments;
  • pH: 0.01 pH units
  • Alkalinity: 0.5 meq/L
  • Ammonia: 0.01–0.1 mg/L
  • Nitrite/Nitrate: 0.1–1 mg/L
Reference Sample:
It isn't necessary to run a reference test to use this kit; however, its proper performance can be validated by running a test in the normal manner except that the reference sample is used in place of aquarium sample. You might choose to run a reference test if you have cause to believe the test is giving incorrect results. If you run a test using the reference sample and obtain the correct result (based on the known reference value provided) then you can safely be sure the test is giving accurate results.

Color Chart:
All MultiTest test kits come with an easy-to-read color chart. It features a 5 cm viewing window to help isolate color and match as closely as possible to the test sample.

Opaque Multi-Cavity Test Plate:
All MultiTest test kits are read from an opaque white test plate. The sliding color chart along with the six-cavity test plate allows for easy reading and comparisons of several samples at the same time.

MultiTest Marine Basic Kit Contents:
  • Marine pH Reagent
  • Alkalinity Reagent
  • pH Reference
  • Alkalinity Reference
  • Alkalinity Pipette
  • Sample Pipette
  • Stir Rod
  • pH Color Chart
  • Total Ammonia Reagent 1
  • Sensor Container (6 sensors)
  • Total Ammonia Reference
  • Forceps
  • Sample Pipette
  • Ammonia Color Chart
  • Nitrite Reagent 1
  • Nitrate Reagent 2
  • Nitrate Reference
  • Sample Pipette
  • Spoon
  • Nitrite/Nitrate Color Chart
  • Multi-Cavity Test Plates (3)
  • Marine pH & Alkalinity Instructions
  • Ammonia Instructions
  • Nitrite/Nitrate Instructions

We Also Recommend