Triton AL99 PO4 Phosphate Remover, 1 Liter - ASAP Aquarium

Triton AL99 PO4 Phosphate Remover, 1 Liter

  • $ 48.00


Triton AL99 PO4 Phosphate Remover

Triton AL99 PO4- 1 Liter of Premium Lab Grade Phosphate Removal Media.  A very high quality, aluminum-based phosphate remover.  It is designed to be as pure as possible to prevent contamination.

AL 99 is very efficient at binding phosphate, but will also bind other contaminants such as Silicate and Barium.  The recommended dosage of AL99 is 50ml per 100L tank volume. In aquariums with very high phosphate levels, this can be increased to 100ml per 100L.  Batch tested for quality and consistency.  As with other parameters, stability is just as important as the actual number itself.  We strongly recommend minimizing fluctuations of your phosphate level.  If you are using a lab grade product like this for the first time, keep the flow through the reactor VERY LOW and TEST DAILY with a good PO4 Phosphate Test.  If the PO4 level starts dropping too quickly, turn off the phosphate media reactor to let the corals acclimate to the lower levels.  Once at your desired concentration, adjust the flow to balance the level against your tanks production of phosphate.  For best results, alternate between an iron based media like RowaPhos or PhosBan and AL99 on a monthly or bimonthly basis for maximum effectiveness. 

Please consult your Triton ICP-OES test results for the specific dosing requirements for your reef system.  When converting an established system to the Triton "method", we recommend an initial water analysis using the Triton Lab Test Kit.


We Also Recommend