Seachem MultiTest Silicate Test Kit
- Measures silicates to less than 0.5 mg/L.
- Multi-cavity plate for simultaneous testing of up to 6 tests at the same time.
- Includes reference for test validation.
- Marine and freshwater.
MultiTest Silicate measures silicates to less than 0.5 mg/L in marine or freshwater. This kit measures soluble silicate and reports it as silicate concentration. To convert to silicon, multiply by 0.3. It performs over 75 tests and contains a reference sample for validation.
Features:
MultiTest Silicate performs over 75 tests, and with the multi-cavity test plate, multiple tests can be run at the same time.
Accuracy:
Range:
Measures between 0–25 mg/L silicate.
Precision:
Detectable changes on the color chart in 0.1–1 mg/L & 0.01–0.1 mg/L increments.
Reference Sample:
It isn't necessary to run a reference test to use this kit; however, its proper performance can be validated by running a test in the normal manner except that the reference sample is used in place of aquarium sample. You might choose to run a reference test if you have cause to believe the test is giving incorrect results.
Color Chart:
All MultiTest test kits come with an easy-to-read color chart. It features a 5 cm viewing window to help isolate color and match as closely as possible to the test sample.
Opaque Multi-Cavity Test Plate:
All MultiTest test kits are read from an opaque white test plate. The sliding color chart along with the six-cavity test plate allows for easy reading and comparisons of several samples at the same time.
MultiTest Silicate Kit Contents:
- Silicate Reagent 1a
- Silicate Reagent 1b
- Silicate Reagent 2
- Silicate Reagent 3
- Silicate Reference
- Stir Rod
- Low Range Cuvette
- Sample Pipette
- Silicate Color Chart
- Multi-Cavity Test Plate
- Instructions
